These sets are used to face valve seats in cylinder heads. Grinding wheels are finished for 45-degree seats on one side and 15-degree seats on the other. The sets come complete with metal box.
The dressing tool has been replaced by the T67680 (2) and T67670 (2A) lathe tools. The wheel is threaded onto the T67680 wheel holder, clamped in a chuck of an engine lathe and re-dressed using the T67670 diamond tip dressing tool.
|2||T67680||Wheel Holder for Lathe|
|2A||T67670||Diamond Cutting Tool Holder|
|3||T18810||Dressing Tool - Rough|
|T18820||Dressing Tool - Finish|
|T10610||Grinding Wheel - 30 Degree|
|4||T10620||Tapered Pilot 9/16" Standard|
|T10630||Tapered Pilot .001 Oversize|
|T10640||Tapered Pilot .002 Oversize|
|T10650||Tapered Pilot .003 Oversize|
|T10660||Tapered Pilot .004 Oversize|
|T10670||Tapered Pilot .005 Oversize|
|7||T10541||Wheel Holder (2 Required)|