These sets are used to face valve seats in EMD 567, 645 and 710 Engine Heads.
The dressing tools have been replaced by the T67680 (4) and T64670 (4A) lathe tools. The wheel is threaded onto the T67680 wheel holder, clamped in a chuck of an engine lathe, and re-dressed using the T67670 diamond tip dressing tool.
1 |
T10471AD EMD |
Air Driver |
2 |
T10500 |
Dial Indicator |
3 |
T10620-.626" |
Tapered Pilot - .626" |
|
T10620-.627" |
Tapered Pilot - .627" |
|
T10620-.628" |
Tapered Pilot - .628" |
|
T10620-.629" |
Tapered Pilot - .629" |
|
T10620-.630" |
Tapered Pilot - .630" |
|
T10620-.631" |
Tapered Pilot - .631" |
4 |
T67680 |
Wheel Holder for Lathe |
4A |
T67670 |
Diamond Cutting Tool Holder |
5 |
T10490 |
Pin - Pilot Removing |
6 |
T10511 |
Spring |
7 |
|
5/16" Allen Wrench |
8 |
|
1/8" Allen Wrench |
9 |
T10541 |
Grinding Wheel Holder (3 required) |
10 |
|
Grinding Wheel (30 degree for 20 degree angle) |
11 |
|
Grinding Wheel (45 degree for 60 degree angle) |
12 |
|
Grinding Wheel (90 degree for 20 degree angle) |
Comparable to EMD 8332668