T50032 Pneumatic Torque Kit for Cylinder Crab Nuts EMD Engines
This kit was developed to speed removal and torquing of EMD crab nuts. The torque motor is rated at 3200 lb.ft. and the reaction bracket pick up is slotted to allow 22 1/2 degree tilt in either direction, which eases placement of the torque motor on the top or bottom crab nut. The torque motor is then positioned by using an overhead crane or jib hoist. To obtain 2400 lb.ft. torque, run the torque motor with no load and set the regulator to the pressure indicated on the tag located on the barrel of the torque motor. At this pressure setting, the torque motor will stall at 2400 lb.ft.